Skip to content

13268-1 BIOS (2 MB, clean ME)

BIOS 13268-1 Added: Oct 19, 2021 RAR · 6.4 MB

File details

TypeBIOS
Board number13268-1
Board maker (ODM)Wistron
DeviceLaptop
FormatRAR
Size6.4 MB
BIOS chip size2 MB
Marksclean ME, tested by uploader
AddedOctober 19, 2021
Updated
Original file nameLMQ-2 MB 13268-1 R90HJ03H CLR ME BIOS TESTED OK.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

This is a BIOS dump for a laptop on Wistron board number 13268-1, supplied for a 2 MB SPI flash chip with the Intel ME region cleaned. The uploader marked it as tested, though that is their own note and not a verification by this catalog. Technicians use a dump like this to reprogram the flash with a programmer after a corrupted BIOS or a failed update. Confirm that the board number and revision on your board match the file before writing, and save the original chip contents first so you can restore them if needed.

The catalog also lists 1 schematic, 1 boardview file, and 6 BIOS dumps for board 13268-1.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: 13268-1. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal