Skip to content

Acer Aspire 4252-V497 DA0ZQAMB6C1 BIOS (REV C)

BIOS DA0ZQAMB6C1 Added: Oct 25, 2021 RAR · 2.1 MB

File details

TypeBIOS
BrandAcer
ModelAspire 4252-V497
Board numberDA0ZQAMB6C1
Board maker (ODM)Quanta
RevisionC
DeviceLaptop
FormatRAR
Size2.1 MB
AddedOctober 25, 2021
Updated
Original file nameACER ASPIRE 4252-V497 CHASSI DA0ZQAMB6C1 REV C.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the Acer Aspire 4252-V497 laptop, board DA0ZQAMB6C1, revision C, with Quanta listed as the ODM. The file is a RAR archive of about 2.1 MB, original name ACER ASPIRE 4252-V497 CHASSI DA0ZQAMB6C1 REV C.rar. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision printed on your motherboard match DA0ZQAMB6C1 rev C, and read out and save the original chip contents as a backup.

For board DA0ZQAMB6C1 the catalog also has 1 schematic and 3 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Acer Aspire 4252-V497 DA0ZQAMB6C1. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal