Skip to content

Acer Aspire E1-571 LA-7912P BIOS (REV 2.0)

BIOS LA-7912P Added: Dec 8, 2018 ZIP · 2.7 MB

File details

TypeBIOS
BrandAcer
ModelAspire E1-571
Board numberLA-7912P
Board maker (ODM)Compal
Revision2.0
DeviceLaptop
FormatZIP
Size2.7 MB
Marksincludes EC firmware
AddedDecember 8, 2018
Updated
Original file nameAspire E1-571 Q5WV1 LA-7912P Rev 2.0 bios &EC&KBC.zip

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
CPU SR0TX KBC ENE KB9012QF GRAPHIC SLJBC read

BIOS dump for the Acer Aspire E1-571 laptop, Compal board LA-7912P, revision 2.0. The archive also includes EC/KBC firmware, so the KBC controller image is supplied alongside the BIOS. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, check that the board number and revision match your board, and read and save the original chip contents as a backup first.

For board LA-7912P the catalog also has 12 schematics, 5 boardview files, and 50 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Acer Aspire E1-571 LA-7912P. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal