Skip to content

Acer Aspire E1 571G LA-7912P BIOS (REV 2.0, 4 MB / 1 MB)

BIOS LA-7912P Added: Nov 20, 2021 RAR · 2.6 MB

File details

TypeBIOS
BrandAcer
ModelAspire E1 571G
Board numberLA-7912P
Board maker (ODM)Compal
Revision2.0
DeviceLaptop
FormatRAR
Size2.6 MB
BIOS chip size4 MB / 1 MB
Markstested by uploader
AddedNovember 20, 2021
Updated
Original file nameAcer_Aspire_E1_571G_LA_7912P_REV_2_0_VGA_710_TESTED_ok_4MB_&_1MB.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
2012-08-24

BIOS dump for the Acer Aspire E1 571G laptop, board LA-7912P, revision 2.0, built by Compal. It is supplied for both 4 MB and 1 MB flash chips and is marked as tested by the uploader, which is not an independent verification. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision match your board, and back up the original chip contents so you can restore them if needed.

For board LA-7912P the catalog also has 12 schematics, 5 boardview files, and 50 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Acer Aspire E1 571G LA-7912P. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal