Skip to content

Acer D270 DA0ZE7MB6D0 BIOS (REV D)

BIOS DA0ZE7MB6D0 Added: May 9, 2024 RAR · 3 MB

File details

TypeBIOS
BrandAcer
ModelD270
Board numberDA0ZE7MB6D0
Board maker (ODM)Quanta
RevisionD
DeviceLaptop
FormatRAR
Size3 MB
Markstested by uploader
AddedMay 9, 2024
Updated
Original file nameACER D270 DA0ZE7MB6D0 REV D WORKING BIOS 100%.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
ACER D270 DA0ZE7MB6D0 REV D WORKING BIOS 100%

BIOS dump for the Acer D270 laptop, board number DA0ZE7MB6D0, revision D, from the Quanta platform. The file is a RAR archive of about 3 MB and is marked as tested by the uploader. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Confirm that the board number and revision printed on your motherboard match before flashing, and back up the original chip contents first.

For board DA0ZE7MB6D0 the catalog also has 1 boardview file and 3 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Acer D270 DA0ZE7MB6D0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal