Skip to content

Acer DA0ZARMBAI1 BIOS

BIOS DA0ZARMBAI1 Added: Sep 14, 2024 RAR · 11 MB

File details

TypeBIOS
BrandAcer
Board numberDA0ZARMBAI1
Board maker (ODM)Quanta
RevisionI
DeviceLaptop
FormatRAR
Size11 MB
BIOS chip size16 MB
Marksclean ME
AddedSeptember 14, 2024
Updated
Original file nameACER DA0ZARMBAI1 REV I 16MB BIOS.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
ACER DA0ZARMBAI1 REV I 16MB BIOS

BIOS dump for an Acer laptop, board DA0ZARMBAI1, revision I, built for a 16 MB flash chip, with the Intel ME region cleaned. The Quanta-built board is listed in the facts, so the ODM is Quanta. Technicians use a dump like this to reprogram the SPI chip with a programmer after a corrupted BIOS or a failed update. Confirm that the board number and revision match your board before flashing, and read out and save the original chip contents first so you can restore them if needed.

The catalog also lists 1 BIOS dump for board DA0ZARMBAI1.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Acer DA0ZARMBAI1. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal