Skip to content

Acer DA0ZQSMB8E0 BIOS

BIOS DA0ZQSMB8E0 Added: Dec 2, 2023 RAR · 8.9 MB

File details

TypeBIOS
BrandAcer
Board numberDA0ZQSMB8E0
Board maker (ODM)Quanta
RevisionE
DeviceLaptop
FormatRAR
Size8.9 MB
Markstested by uploader
AddedDecember 2, 2023
Updated
Original file nameACER DA0ZQSMB8E0 REVE WORKING BIOS 100%.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
ACER DA0ZQSMB8E0 REVE WORKING BIOS 100%

BIOS dump for the Acer laptop board DA0ZQSMB8E0, made by Quanta, revision E, supplied as a RAR archive of about 8.9 MB. The uploader marked it as tested, though that label comes from the poster and has not been independently checked. A BIOS dump like this is used with an SPI programmer to reflash the flash chip after a corrupted BIOS or a failed update. Confirm that the board number and revision match your motherboard before writing anything, and back up the original chip contents first so you can restore them if needed.

For board DA0ZQSMB8E0 the catalog also has 1 schematic.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Acer DA0ZQSMB8E0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal