Skip to content

Acer E1-521 LA-8531P BIOS (REV 1.0, 4 MB)

BIOS LA-8531P Added: Aug 29, 2020 7Z · 1.9 MB

File details

TypeBIOS
BrandAcer
ModelE1-521
Board numberLA-8531P
Board maker (ODM)Compal
Revision1.0
DeviceLaptop
Format7Z
Size1.9 MB
BIOS chip size4 MB
AddedAugust 29, 2020
Updated
Original file nameAcer E1-521_Compal_Q5WT6_LA-8531P_Rev_1.0_EN25Q32B.7z

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the Acer E1-521 laptop, Compal board LA-8531P, PCB revision 1.0, supplied as a 7Z archive of about 1.9 MB for a 4 MB flash chip. The original file name also references the EN25Q32B chip and the Q5WT6 designation. Technicians use a dump like this to reprogram the SPI flash with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision match your motherboard and save a backup of the original chip contents so you can recover if the write goes wrong.

The catalog also lists 1 schematic and 4 BIOS dumps for board LA-8531P.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Acer E1-521 LA-8531P. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal