Skip to content

Acer E5-411 DA0ZQMMB6F0 BIOS

BIOS DA0ZQMMB6F0 Added: Jul 2, 2023 RAR · 2.7 MB

File details

TypeBIOS
BrandAcer
ModelE5-411
Board numberDA0ZQMMB6F0
Board maker (ODM)Quanta
RevisionF
DeviceLaptop
FormatRAR
Size2.7 MB
AddedJuly 2, 2023
Updated
Original file nameACER E5-411 ZQM DA0ZQMMB6F0 REV.F TESTE OK.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
ACER E5-411 ZQM DA0ZQMMB6F0 REV.F TESTE OK

BIOS dump for the Acer E5-411 laptop, board number DA0ZQMMB6F0, revision F, from the Quanta ODM. The archive is a RAR file of about 2.7 MB, and the original caption marks it as tested. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision on your motherboard match the file, and save a backup of the original chip contents so you can recover if the write goes wrong.

For board DA0ZQMMB6F0 the catalog also has 1 schematic and 1 BIOS dump.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Acer E5-411 DA0ZQMMB6F0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal