Skip to content

Acer E5 574G DA0ZRWMB6G0 BIOS

BIOS DA0ZRWMB6G0 Added: Feb 8, 2021 RAR · 4.5 MB

File details

TypeBIOS
BrandAcer
ModelE5 574G
Board numberDA0ZRWMB6G0
Board maker (ODM)Quanta
RevisionG
DeviceLaptop
FormatRAR
Size4.5 MB
AddedFebruary 8, 2021
Updated
Original file nameAcer_e5_574g_DA0ZRWMB6G0_Quanta_ZRW_Discrete_N16S_GT_S_A2_rev_G.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the Acer E5 574G laptop, board number DA0ZRWMB6G0 from Quanta, revision G, supplied as a RAR archive of about 4.5 MB. The original file name also references the ZRW discrete board variant. Technicians use a dump like this to reprogram the SPI flash chip with a programmer after BIOS corruption or a failed update. Before flashing, confirm that the board number and revision printed on your motherboard match the file, and read and save the original chip contents as a backup so you can restore them if needed.

The catalog also lists 3 schematics, 3 boardview files, and 11 BIOS dumps for board DA0ZRWMB6G0.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Acer E5 574G DA0ZRWMB6G0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal