Skip to content

Acer KAV60 LA-5141P BIOS (REV 1.0)

BIOS LA-5141P Added: May 27, 2018 RAR · 3.3 MB

File details

TypeBIOS
BrandAcer
Board numberLA-5141P
PlatformKAV60
Board maker (ODM)Compal
Revision1.0
DeviceLaptop
FormatRAR
Size3.3 MB
AddedMay 27, 2018
Updated
Original file nameAcer Aspire One D250 KAV60 LA-5141P Rev 1.0.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
Acer Aspire One D250-0Bk Compal KAV60 LA-5141P Rev: 1.0 Flash: EON F80-75HCP SOIC-8

BIOS dump for the Acer Aspire One D250 laptop, built on the Compal KAV60 platform with board LA-5141P, revision 1.0. The RAR archive is about 3.3 MB. Technicians use a dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision match your motherboard, and back up the original chip contents so you can restore them if something goes wrong.

For board LA-5141P the catalog also has 4 schematics and 8 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Acer KAV60 LA-5141P. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal