Skip to content

AILE1 NM-A151 BIOS (REV 1.0, 8 MB / 4 MB)

BIOS NM-A151 Added: Sep 22, 2024 RAR · 5.4 MB

File details

TypeBIOS
Board numberNM-A151
PlatformAILE1
Board maker (ODM)Compal
Revision1.0
DeviceLaptop
FormatRAR
Size5.4 MB
BIOS chip size8 MB / 4 MB
AddedSeptember 22, 2024
Updated
Original file nameBIOS E440 AILE1 NM-A151 REV 1.0 U8M1 4MB & 8MB OK.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
BIOS E440 AILE1 NM-A151 REV 1.0 U8M1 4MB & 8MB OK

BIOS dump for a Compal laptop board NM-A151, platform AILE1, PCB revision 1.0, supplied for both 8 MB and 4 MB flash chips. The archive is a RAR file of about 5.4 MB. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before writing anything, confirm that the board number and revision on your motherboard match NM-A151 rev 1.0, and save the original chip contents as a backup.

For board NM-A151 the catalog also has 1 schematic and 7 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: AILE1 NM-A151. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal