Skip to content

Apple A1286 820-2850 BIOS (4 MB)

BIOS 820-2850 Added: Jun 28, 2025 RAR · 4.6 MB

File details

TypeBIOS
BrandApple
ModelA1286
Board number820-2850
Board maker (ODM)Apple
DeviceLaptop
FormatRAR
Size4.6 MB
BIOS chip size4 MB
AddedJune 28, 2025
Updated
Original file nameAPPLE A1286 MLB 820-2850-A 4MB BIOS.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
APPLE A1286 MLB 820-2850-A 4MB BIOS

BIOS dump for the Apple A1286 laptop, logic board 820-2850 (file name lists revision A), built for a 4 MB flash chip. The archive is a RAR file of about 4.6 MB. Technicians use a dump like this to reprogram the SPI flash with a programmer after BIOS corruption or a failed update. Before writing anything, confirm that the board number and revision on your logic board match 820-2850-A, and back up the original chip contents first so you can restore them if needed.

For board 820-2850 the catalog also has 2 schematics, 2 boardview files, and 5 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Apple A1286 820-2850. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal