Skip to content

Apple MacBook Pro A1398 BIOS

BIOS Added: Apr 11, 2021 RAR · 4.8 MB

File details

TypeBIOS
BrandApple
ModelMacBook Pro A1398
DeviceLaptop
FormatRAR
Size4.8 MB
AddedApril 11, 2021
Updated
Original file nameAPPLE_MacBook_Pro_A1398_Retina,_15_inch,_Late_2013,_CORE_I7_,_EMC.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the Apple MacBook Pro A1398, a 15-inch Retina laptop listed as Late 2013 with an Core i7 configuration, supplied as a RAR archive of about 4.8 MB. The archive name is APPLE_MacBook_Pro_A1398_Retina,_15_inch,_Late_2013,_CORE_I7_,_EMC.rar. Technicians use a dump like this to reprogram the SPI flash chip with a programmer after a corrupted firmware image or a failed update. Before writing anything, confirm that the model and EMC number on your board match the file, and save a full backup of the original chip contents first.

The catalog also lists 1 schematic, 2 boardview files, and 2 BIOS dumps for the Apple MacBook Pro A1398.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Apple MacBook Pro A1398. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal