Skip to content

ASUS PRIME B250M-D BIOS

BIOS Added: Sep 23, 2024 RAR · 14 MB

File details

TypeBIOS
BrandASUS
ModelPRIME B250M-D
Revision1.01
DeviceDesktop motherboard
FormatRAR
Size14 MB
BIOS chip size8 MB
Markstested by uploader
AddedSeptember 23, 2024
Updated
Original file nameASUS PRIME B250M-D REV 1.01 8MB WORKING BIOS 100%.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
ASUS PRIME B250M-D REV 1.01 8MB WORKING BIOS 100%

BIOS dump for the ASUS PRIME B250M-D desktop motherboard, revision 1.01, supplied for an 8 MB flash chip and packed as a RAR archive of about 13.8 MB. The uploader marked it as tested, though that is their own note and not a verification by this catalog. A dump like this is used to reprogram the SPI chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board model and revision match yours, and save the original contents of your chip as a backup.

For the ASUS PRIME B250M-D the catalog also has 1 boardview file.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: ASUS PRIME B250M-D. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal