Skip to content

ASUS ROG GL552VW BIOS (REV 2.0, 8 MB)

BIOS Added: Aug 11, 2024 RAR · 3.9 MB

File details

TypeBIOS
BrandASUS
ModelROG GL552VW
Revision2.0
DeviceLaptop
FormatRAR
Size3.9 MB
BIOS chip size8 MB
Marksincludes EC firmware
AddedAugust 11, 2024
Updated
Original file nameASUS ROG GL552VW REV 2.0 8MB BIOS & EC.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
ASUS ROG GL552VW REV 2.0 8MB BIOS & EC

BIOS dump for the ASUS ROG GL552VW laptop, revision 2.0, built for an 8 MB flash chip and including EC/KBC firmware in the same archive. Technicians use a dump like this to reprogram the SPI chip with a programmer after a corrupted BIOS or a failed update, and the EC firmware is useful when the embedded controller needs restoring too. Before flashing, confirm that the board number and revision on your motherboard match REV 2.0 and that the chip is 8 MB. Always back up the original chip contents first.

The catalog also lists 1 boardview file and 1 BIOS dump for the ASUS ROG GL552VW.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: ASUS ROG GL552VW. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal