Skip to content

ASUS TP410UA BIOS (REV 2.0, clean ME)

BIOS Added: Apr 22, 2024 RAR · 16 MB

File details

TypeBIOS
BrandASUS
ModelTP410UA
Revision2.0
DeviceLaptop
FormatRAR
Size16 MB
Marksclean ME, tested by uploader
AddedApril 22, 2024
Updated
Original file nameASUS TP410UA REV 2.0 CLEAN ME TESTED BIOS OK.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
ASUS TP410UA REV 2.0 CLEAN ME TESTED BIOS OK

BIOS dump for the ASUS TP410UA laptop, revision 2.0, packed as a RAR archive of about 15.7 MB. The file carries a clean ME mark, meaning the Intel ME region has been reset, and the uploader describes it as tested, which the catalog does not verify. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before writing anything, confirm that the revision matches your board and back up the original chip contents so you can recover if the flash goes wrong.

For the ASUS TP410UA the catalog also has 1 boardview file and 1 BIOS dump.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: ASUS TP410UA. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal