Skip to content

ASUS VivoBook X540UP DAXKAIMB8C0 BIOS (REV C)

BIOS DAXKAIMB8C0 Added: Jan 19, 2021 RAR · 5.4 MB

File details

TypeBIOS
BrandASUS
ModelVivoBook X540UP
Board numberDAXKAIMB8C0
Board maker (ODM)Quanta
RevisionC
DeviceLaptop
FormatRAR
Size5.4 MB
Markstested by uploader
AddedJanuary 19, 2021
Updated
Original file nameASUS VivoBook X540UP motherboard DAXKAIMB8C0 REVC X540UP.312.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the ASUS VivoBook X540UP laptop, board DAXKAIMB8C0 from Quanta, revision C, supplied as a 5.4 MB RAR archive and marked as tested by the uploader. A technician would use this kind of file to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before writing anything, confirm that the board number and revision printed on your motherboard match DAXKAIMB8C0 and REV C, and save a full backup of the original chip contents so you can restore it if needed.

For board DAXKAIMB8C0 the catalog also has 2 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: ASUS VivoBook X540UP DAXKAIMB8C0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal