aus-k56cm-rev-20-board-view BIOS
File details
| Type | BIOS |
|---|---|
| Revision | 20 |
| Format | RAR |
| Size | 0.2 MB |
| Added | August 2, 2017 |
| Updated | |
| Original file name | aus-k56cm-rev-20-board-view.rar |
Where to get the file
Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.
Alternative links
No other copies are known yet.
Description
Listed as a BIOS dump, revision 20, supplied as a 0.2 MB RAR archive named aus-k56cm-rev-20-board-view.rar. The file name points to a boardview, so open the archive and confirm what it contains before relying on it. A BIOS dump is used to reprogram the SPI flash chip with a programmer after corruption or a failed update, while a boardview shows component and test point locations on the PCB. Check that the K56CM model and revision 20 match your motherboard, and back up the original chip contents before writing anything.
Description generated from the catalog data. ·
Questions about this file
How do I flash this BIOS dump?
Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.
Will this BIOS work on my board?
Only if the board number and revision match: aus-k56cm-rev-20-board-view. Dumps from a different board or revision can leave the board dead.
What does “clean ME” mean?
The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.