Skip to content

Biostar TB150 PRO BIOS (16 MB)

BIOS Added: Feb 12, 2024 RAR · 8.2 MB

File details

TypeBIOS
BrandBiostar
ModelTB150 PRO
DeviceDesktop motherboard
FormatRAR
Size8.2 MB
BIOS chip size16 MB
AddedFebruary 12, 2024
Updated
Original file nameBIOSTAR TB150 PRO TB250-BTC V6.0 16MB OKOK.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
BIOSTAR TB150 PRO TB250-BTC V6.0 16MB

BIOS dump for the Biostar TB150 PRO desktop motherboard, supplied for a 16 MB flash chip in a RAR archive of about 8.2 MB. The original file name also references TB250-BTC V6.0, so note that the exact board number and revision on your PCB should be checked against it before anything is flashed. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Read and save the original chip contents first so you can restore them if the write goes wrong.

The catalog also lists 1 BIOS dump for the Biostar TB150 PRO.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Biostar TB150 PRO. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal