D-LINK DSL-2600U BLACK HW VER Z1 FW VER 1.00 MX25L1605 BIOS
File details
| Type | BIOS |
|---|---|
| Revision | Z1 |
| Format | RAR |
| Size | 1 MB |
| BIOS chip size | 2 MB |
| Added | September 22, 2021 |
| Updated | |
| Original file name | D-LINK DSL-2600U BLACK HW VER Z1 FW VER 1.00 MX25L1605.rar |
Where to get the file
Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.
Alternative links
No other copies are known yet.
Description
BIOS dump for a D-LINK DSL-2600U router, hardware version Z1, firmware version 1.00, as indicated by the original file name D-LINK DSL-2600U BLACK HW VER Z1 FW VER 1.00 MX25L1605.rar. The dump covers a 2 MB flash chip, and the file name points to an MX25L1605 part. Technicians use a dump like this to reprogram the SPI flash with a programmer after corrupted firmware or a failed update. Confirm the hardware version on the device label matches Z1, and back up the original chip contents before writing anything.
Description generated from the catalog data. ·
Questions about this file
How do I flash this BIOS dump?
Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.
Will this BIOS work on my board?
Only if the board number and revision match: D-LINK DSL-2600U BLACK HW VER Z1 FW VER 1.00 MX25L1605. Dumps from a different board or revision can leave the board dead.
What does “clean ME” mean?
The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.