Skip to content

DA0AT1MB8H0 BIOS (REV H, 1 MB)

BIOS DA0AT1MB8H0 Added: Sep 30, 2023 RAR · 0.6 MB

File details

TypeBIOS
Board numberDA0AT1MB8H0
Board maker (ODM)Quanta
RevisionH
DeviceLaptop
FormatRAR
Size0.6 MB
BIOS chip size1 MB
Markstested by uploader
AddedSeptember 30, 2023
Updated
Original file nameDA0AT1MB8H0 REV H 1MB TESTED OK.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
DA0AT1MB8H0 REV H 1MB TESTED OK

BIOS dump for a Quanta laptop motherboard with board number DA0AT1MB8H0, revision H, for a 1 MB flash chip. The uploader marked the file as tested, but that is their own note and has not been verified here. Technicians use a dump like this to reprogram the SPI flash with a programmer after a corrupted BIOS or a failed update. Before writing anything, confirm that the board number and revision match your board, and back up the original chip contents first so you can restore them if needed.

The catalog also lists 1 schematic and 3 BIOS dumps for board DA0AT1MB8H0.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: DA0AT1MB8H0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal