Skip to content

DA0NZDMB6E0 BIOS

BIOS DA0NZDMB6E0 Added: Dec 28, 2024 RAR · 6.6 MB

File details

TypeBIOS
Board numberDA0NZDMB6E0
Board maker (ODM)Quanta
DeviceLaptop
FormatRAR
Size6.6 MB
BIOS chip size8 MB
Markstested by uploader
AddedDecember 28, 2024
Updated
Original file nameDA0NZDMB6E0 8MB TESTED BIOS OK.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
DA0NZDMB6E0 8MB TESTED BIOS OK

BIOS dump for a Quanta laptop motherboard with board number DA0NZDMB6E0, supplied for an 8 MB flash chip. The uploader marks it as tested, though the catalog does not verify that claim. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after BIOS corruption or a failed update. The archive is a RAR file of about 6.6 MB, named DA0NZDMB6E0 8MB TESTED BIOS OK.rar. Confirm that the board number and revision match your motherboard before flashing, and back up the original chip contents first.

The catalog also lists 1 boardview file for board DA0NZDMB6E0.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: DA0NZDMB6E0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal