Skip to content

DA0Z8GMB8F0 BIOS (REV F)

BIOS DA0Z8GMB8F0 Added: Feb 3, 2024 RAR · 8.1 MB

File details

TypeBIOS
Board numberDA0Z8GMB8F0
Board maker (ODM)Quanta
RevisionF
DeviceLaptop
FormatRAR
Size8.1 MB
Markstested by uploader
AddedFebruary 3, 2024
Updated
Original file nameDA0Z8GMB8F0 REV F Z8G TESTED BIOS OK.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
DA0Z8GMB8F0 REV F Z8G TESTED BIOS OK

BIOS dump for a Quanta laptop, board number DA0Z8GMB8F0, revision F. The uploader marked it as tested, and the archive is an 8.1 MB RAR file. Technicians use a dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision on your motherboard match exactly, and back up the original chip contents so you can recover if the write does not go as planned.

The catalog also lists 1 schematic and 3 BIOS dumps for board DA0Z8GMB8F0.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: DA0Z8GMB8F0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal