Skip to content

DA0Z91MBAE0 BIOS (REV E, 16 MB)

BIOS DA0Z91MBAE0 Added: Jan 26, 2025 RAR · 4.7 MB

File details

TypeBIOS
Board numberDA0Z91MBAE0
Board maker (ODM)Quanta
RevisionE
DeviceLaptop
FormatRAR
Size4.7 MB
BIOS chip size16 MB
AddedJanuary 26, 2025
Updated
Original file nameSURFACE 1943 DA0Z91MBAE0 REV E 16MB BIOS.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
SURFACE 1943 DA0Z91MBAE0 REV E 16MB BIOS

BIOS dump for a laptop board numbered DA0Z91MBAE0, revision E, made by Quanta and supplied for a 16 MB flash chip. The original file is named SURFACE 1943 DA0Z91MBAE0 REV E 16MB BIOS and comes as a RAR archive of about 4.7 MB. Technicians use a dump like this to reprogram the SPI flash with a programmer after BIOS corruption or a failed update. Confirm that the board number and revision match your board before flashing, and read and save the original chip contents first so you can restore them if needed.

The catalog also lists 2 BIOS dumps for board DA0Z91MBAE0.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: DA0Z91MBAE0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal