Skip to content

DAG3EEMBCF0 BIOS

BIOS DAG3EEMBCF0 Added: Jan 9, 2024 RAR · 30 MB

File details

TypeBIOS
Board numberDAG3EEMBCF0
Board maker (ODM)Quanta
RevisionF
DeviceLaptop
FormatRAR
Size30 MB
BIOS chip size16 MB / 1 MB
Markstested by uploader
AddedJanuary 9, 2024
Updated
Original file nameDAG3EEMBCF0 REV F WORKING BIOS 100%.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
DAG3EEMBCF0 REV F 16MB &1MB WORKING BIOS 100% GN20-E3-A

BIOS dump for the Quanta laptop board DAG3EEMBCF0, revision F, supplied for both 16 MB and 1 MB flash chips. The uploader marked it as tested. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Check that the board number and revision on your board match the file before flashing, and back up the original chip contents first. The archive is a 29.7 MB RAR file, and the original name is DAG3EEMBCF0 REV F WORKING BIOS 100%.rar.

The catalog also lists 1 BIOS dump for board DAG3EEMBCF0.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: DAG3EEMBCF0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal