Skip to content

DAG75AMBAD0 BIOS (REV D)

BIOS DAG75AMBAD0 Added: Nov 19, 2023 RAR · 15 MB

File details

TypeBIOS
Board numberDAG75AMBAD0
Board maker (ODM)Quanta
RevisionD
DeviceLaptop
FormatRAR
Size15 MB
Marksincludes EC firmware
AddedNovember 19, 2023
Updated
Original file nameDAG75AMBAD0 REV D REV D BIOS & KBEC.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
DAG75AMBAD0 REV D REV D BIOS & KBEC

BIOS dump for a Quanta laptop board numbered DAG75AMBAD0, revision D, packaged as a RAR archive of about 14.8 MB. The file includes EC/KBC firmware alongside the BIOS image. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update, and the EC/KBC firmware can be relevant when the embedded controller also needs restoring. Confirm that the board number and revision match your motherboard before flashing, and back up the original chip contents first.

For board DAG75AMBAD0 the catalog also has 1 boardview file and 4 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: DAG75AMBAD0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal