Skip to content

DAN73AMB6D0 BIOS (REV D)

BIOS DAN73AMB6D0 Added: May 14, 2023 ZIP · 6.6 MB

File details

TypeBIOS
Board numberDAN73AMB6D0
Board maker (ODM)Quanta
RevisionD
DeviceLaptop
FormatZIP
Size6.6 MB
Markstested by uploader
AddedMay 14, 2023
Updated
Original file nameDAN73AMB6D0 REV D 08448 WORKING BIOS 100% .zip

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
DAN73AMB6D0 REV D 08448 WORKING BIOS 100%

BIOS dump for a Quanta laptop motherboard, board number DAN73AMB6D0, revision D. The uploader marks it as tested, and the archive is a ZIP of about 6.6 MB. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after corruption or a failed firmware update. Before flashing, confirm that the board number and revision on your own board match DAN73AMB6D0 REV D, and read out and save the original chip contents as a backup. The "tested" mark comes from the uploader and has not been independently checked.

For board DAN73AMB6D0 the catalog also has 4 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: DAN73AMB6D0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal