Skip to content

Dell 1530 REVA03 07212-3 BIOS

BIOS 07212-3 Added: Mar 10, 2022 ZIP · 0.8 MB

File details

TypeBIOS
BrandDell
Model1530
Board number07212-3
PlatformREVA03
Board maker (ODM)Wistron
DeviceLaptop
FormatZIP
Size0.8 MB
AddedMarch 10, 2022
Updated
Original file nameDELL 1530 PP28L DH3 REVA03 MB 07212-3 G84-600-A2 Bios.zip

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the Dell 1530 laptop, board number 07212-3, platform REVA03, Wistron ODM, supplied as a ZIP archive of about 0.8 MB. The original file name also lists PP28L and G84-600-A2, which you can use to cross-check against your own board. Technicians use a dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision match your motherboard, and save a backup of the original chip contents so you can restore it if needed.

For board 07212-3 the catalog also has 1 schematic and 2 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Dell 1530 REVA03 07212-3. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal