Skip to content

Dell 17R BIOS (REV D)

BIOS Added: Jun 24, 2023 RAR · 4.9 MB

File details

TypeBIOS
BrandDell
Model17R
RevisionD
DeviceLaptop
FormatRAR
Size4.9 MB
Markstested by uploader
AddedJune 24, 2023
Updated
Original file nameDell_N7010_17r_DAUM9MB6D0_Rev_D_216_0774007_HM57_WORKING_BIOS_100%.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
Dell N7010 17r - DAUM9MB6D0 Rev D 216-0774007 HM57 WORKING BIOS 100%

BIOS dump for the Dell 17R laptop, revision D, supplied as a 4.9 MB RAR archive. The original file name lists the board as DAUM9MB6D0 with part number 216-0774007 and the N7010 model name, and the uploader marked it as tested. Technicians use a dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Confirm that the board number and revision on your motherboard match before flashing, and back up the original chip contents first.

The catalog also lists 4 schematics and 2 BIOS dumps for the Dell 17R.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Dell 17R. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal