Skip to content

Dell DDM70 LA-F402P BIOS

BIOS LA-F402P Added: Apr 15, 2023 RAR · 21 MB

File details

TypeBIOS
BrandDell
Board numberLA-F402P
PlatformDDM70
Board maker (ODM)Compal
Revision1.0
DeviceLaptop
FormatRAR
Size21 MB
Markstested by uploader
AddedApril 15, 2023
Updated
Original file nameDELL_LATTITUDE_5490_DDM70_LA_F402P_REV_1_0A00_2017_09_20_WORKING.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
DELL LATTITUDE 5490 DDM70 LA-F402P REV 1.0(A00) 2017-09-20 WORKING BIOS 100%

BIOS dump for the Dell Latitude 5490 laptop, board LA-F402P revision 1.0 on the DDM70 platform, an ODM Compal design. The uploader marked it as tested, and the archive is a 21.1 MB RAR. Technicians use a dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision match your laptop, and save the original chip contents as a backup so you can restore them if needed.

For board LA-F402P the catalog also has 1 schematic and 2 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Dell DDM70 LA-F402P. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal