Skip to content

Dell DG15 LA-K455P BIOS

BIOS LA-K455P Added: Jul 8, 2026 RAR · 9 MB

File details

TypeBIOS
BrandDell
ModelDG15
Board numberLA-K455P
Board maker (ODM)Compal
Revision10
DeviceLaptop
FormatRAR
Size9 MB
BIOS chip size32 MB
Marksclean ME
AddedJuly 8, 2026
Updated
Original file nameDELL DG15 5511 LA-K455P REV_10 CLEAN ME 32MB BIOS .rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
DELL DG15 5511 LA-K455P REV_10 CLEAN ME 32MB BIOS

BIOS dump for the Dell DG15 laptop, board LA-K455P revision 10, produced by Compal and supplied for a 32 MB flash chip with the Intel ME region cleaned. The file is a RAR archive of about 9 MB. Technicians use a dump like this to reprogram the SPI chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision match your laptop, and save the original chip contents as a backup first.

For board LA-K455P the catalog also has 1 schematic and 3 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Dell DG15 LA-K455P. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal