Skip to content

Dell G5 SELEK 19802-1 BIOS

BIOS 19802-1 Added: Jul 29, 2024 RAR · 4.7 MB

File details

TypeBIOS
BrandDell
ModelG5
Board number19802-1
PlatformSELEK
Board maker (ODM)Wistron
DeviceLaptop
FormatRAR
Size4.7 MB
BIOS chip size16 MB
Markstested by uploader
AddedJuly 29, 2024
Updated
Original file nameDELL_G5_P89F_Selek_MLK_AMD_MB_19802_1_16MB_BIOS_TESTED_OK.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
DELL G5 P89F - Selek MLK AMD - MB 19802-1 16MB BIOS TESTED OK

BIOS dump for the Dell G5 laptop on board 19802-1 (Wistron ODM, platform SELEK), supplied for a 16 MB SPI flash chip and marked by the uploader as tested. Technicians use a dump like this to reprogram the flash with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision on your motherboard match the file, and back up the original chip contents first. The tested mark comes from the uploader and has not been independently verified.

For board 19802-1 the catalog also has 1 schematic and 1 BIOS dump.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Dell G5 SELEK 19802-1. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal