Skip to content

Dell GDC31 LA-K371P BIOS (REV 3.0)

BIOS LA-K371P Added: Apr 28, 2022 RAR · 13 MB

File details

TypeBIOS
BrandDell
ModelGDC31
Board numberLA-K371P
Board maker (ODM)Compal
Revision3.0
DeviceLaptop
FormatRAR
Size13 MB
Markstested by uploader
AddedApril 28, 2022
Updated
Original file nameDELL GDC31 LA-K371P REV 3.0 WORKING BIOS.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the Dell GDC31 laptop, board LA-K371P, Compal-built, PCB revision 3.0. The uploader marked it as tested, and the archive is a RAR of about 13.1 MB. Technicians use a dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before writing anything, confirm that the board number and revision match your board, and read out and save the original chip contents as a backup. The "tested" mark comes from the uploader and is not independently verified.

The catalog also lists 1 schematic, 1 boardview file, and 7 BIOS dumps for board LA-K371P.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Dell GDC31 LA-K371P. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal