Skip to content

Dell Inspiron 11-3147 16808-1 BIOS

BIOS 16808-1 Added: Jun 4, 2020 RAR · 3 MB

File details

TypeBIOS
BrandDell
ModelInspiron 11-3147
Board number16808-1
Board maker (ODM)Wistron
DeviceLaptop
FormatRAR
Size3 MB
Marksclean ME
AddedJune 4, 2020
Updated
Original file nameDell Inspiron 11-3147 3000 16808-1 series Clean ME.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the Dell Inspiron 11-3147 laptop, board number 16808-1, with the Wistron ODM label and a cleaned Intel ME region. The archive is a RAR file of about 3 MB. Technicians use a dump like this to reprogram the SPI flash chip with a programmer when the BIOS has been corrupted or a firmware update has failed. Before flashing, confirm that the board number and revision on your motherboard match the file, and back up the original chip contents so you can recover if something goes wrong.

The catalog also lists 1 schematic, 1 boardview file, and 7 BIOS dumps for board 16808-1.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Dell Inspiron 11-3147 16808-1. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal