Skip to content

Dell Inspiron 7306 BIOS

BIOS Added: May 6, 2024 RAR · 9.9 MB

File details

TypeBIOS
BrandDell
ModelInspiron 7306
DeviceLaptop
FormatRAR
Size9.9 MB
BIOS chip size16 MB / 8 MB
Markstested by uploader
AddedMay 6, 2024
Updated
Original file nameDELL_INSPIRON_7306_2_in_1_HELLCAT_13_TGL_MB_8MB_&_16MB_BIOS_TESTED.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
DELL INSPIRON 7306 2 in 1 HELLCAT 13 TGL MB 8MB & 16MB BIOS TESTED OK

BIOS dump for the Dell Inspiron 7306 2 in 1 laptop, supplied for both 16 MB and 8 MB flash chips and marked as tested by the uploader. The archive is a RAR file of about 9.9 MB, with the original name DELL_INSPIRON_7306_2_in_1_HELLCAT_13_TGL_MB_8MB_&_16MB_BIOS_TESTED.rar. A dump like this is used to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision match your motherboard, and back up the original chip contents first.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Dell Inspiron 7306. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal