Skip to content

Dell Inspiron 7506 HELLCAT 19859-1 BIOS (16 MB / 8 MB)

BIOS 19859-1 Added: Jun 27, 2022 RAR · 10 MB

File details

TypeBIOS
BrandDell
ModelInspiron 7506
Board number19859-1
PlatformHELLCAT
Board maker (ODM)Wistron
DeviceLaptop
FormatRAR
Size10 MB
BIOS chip size16 MB / 8 MB
AddedJune 27, 2022
Updated
Original file nameINSPIRON 7506 2-in-1 HELLCAT 19859-1 8MB & 16MB BIOS.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the Dell Inspiron 7506 laptop, board number 19859-1 from Wistron, platform HELLCAT. The archive covers both 16 MB and 8 MB flash chip sizes, so you can pick the variant that matches the SPI chip on your board. A dump like this is used with a programmer to reprogram the SPI flash after a corrupted BIOS or a failed update. Before flashing, confirm the board number and revision match your motherboard, and back up the original chip contents so you can restore them if something goes wrong.

For board 19859-1 the catalog also has 2 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Dell Inspiron 7506 HELLCAT 19859-1. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal