Skip to content

Dell Latitude 5300 BIOS

BIOS Added: Feb 29, 2024 RAR · 23 MB

File details

TypeBIOS
BrandDell
ModelLatitude 5300
DeviceLaptop
FormatRAR
Size23 MB
AddedFebruary 29, 2024
Updated
Original file nameDELL_Latitude_5300_and_5300_2_in_1_NORTHBAY18717_1_TBT_MB_A00_.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
DELL Latitude 5300 and 5300 2-in-1 NORTHBAY18717-1 TBT MB A00

BIOS dump for the Dell Latitude 5300 laptop, shared as a RAR archive of about 22.7 MB. The original file name references the Latitude 5300 and 5300 2-in-1 with the NORTHBAY18717-1 TBT MB A00 board designation, so the board number and revision on your motherboard should be checked against that label before flashing. A BIOS dump like this is used to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Back up the original chip contents first so you can recover if the write goes wrong.

The catalog also lists 1 boardview file and 10 BIOS dumps for the Dell Latitude 5300.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Dell Latitude 5300. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal