Skip to content

Dell Latitude 5320 19817-1 BIOS (32 MB, clean ME)

BIOS 19817-1 Added: Feb 22, 2025 RAR · 13 MB

File details

TypeBIOS
BrandDell
ModelLatitude 5320
Board number19817-1
Board maker (ODM)Wistron
DeviceLaptop
FormatRAR
Size13 MB
BIOS chip size32 MB
Marksclean ME
AddedFebruary 22, 2025
Updated
Original file nameDELL LATITUDE 5320 19817-1 32MB CLEAN ME OKOK.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
DELL LATITUDE 5320 19817-1 32MB CLEAN ME

BIOS dump for the Dell Latitude 5320 laptop, Wistron board 19817-1, prepared for a 32 MB flash chip with the Intel ME region cleaned. Technicians use a dump like this to reprogram the SPI chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision on your motherboard match the file, and save the original chip contents as a backup so you can restore them if needed.

For board 19817-1 the catalog also has 2 schematics, 1 boardview file, and 3 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Dell Latitude 5320 19817-1. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal