Skip to content

Dell Latitude 5580 CDP80 LA-E152P BIOS (REV 1.0)

BIOS LA-E152P Added: Sep 27, 2023 RAR · 8.7 MB

File details

TypeBIOS
BrandDell
ModelLatitude 5580
Board numberLA-E152P
PlatformCDP80
Board maker (ODM)Compal
Revision1.0
DeviceLaptop
FormatRAR
Size8.7 MB
AddedSeptember 27, 2023
Updated
Original file nameLatitude 5580 -CDP80 LA-E152P Rev 1.0(A00).rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
Latitude 5580 -CDP80 LA-E152P Rev 1.0(A00)

BIOS dump for the Dell Latitude 5580 laptop, board LA-E152P revision 1.0, platform CDP80, built by Compal and supplied as a RAR archive of about 8.7 MB. A dump like this is used to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision printed on your motherboard match LA-E152P Rev 1.0, and read out and save the original chip contents as a backup.

For board LA-E152P the catalog also has 1 schematic and 6 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Dell Latitude 5580 CDP80 LA-E152P. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal