Skip to content

Dell Latitude 7300 LA-G861P BIOS (REV 1.0, 32 MB)

BIOS LA-G861P Added: Sep 24, 2023 RAR · 46 MB

File details

TypeBIOS
BrandDell
ModelLatitude 7300
Board numberLA-G861P
Board maker (ODM)Compal
Revision1.0
DeviceLaptop
FormatRAR
Size46 MB
BIOS chip size32 MB
AddedSeptember 24, 2023
Updated
Original file nameDELL LATITUDE 7300 LA-G861P REV 1.0 BIOS 32 MB.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
DELL LATITUDE 7300 LA-G861P REV 1.0 BIOS 32 MB

BIOS dump for the Dell Latitude 7300 laptop, board LA-G861P revision 1.0, built by Compal and supplied for a 32 MB flash chip. Technicians use a dump like this to reprogram the SPI chip with a programmer after BIOS corruption or a failed update. Before flashing, confirm that the board number and revision match your motherboard, and back up the original chip contents so you can restore them if needed. The archive is a RAR file of about 45.6 MB.

The catalog also lists 8 BIOS dumps for board LA-G861P.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Dell Latitude 7300 LA-G861P. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal