Skip to content

Dell M5110 10246-1 BIOS (2 MB)

BIOS 10246-1 Added: Mar 18, 2024 RAR · 2.9 MB

File details

TypeBIOS
BrandDell
ModelM5110
Board number10246-1
Board maker (ODM)Wistron
DeviceLaptop
FormatRAR
Size2.9 MB
BIOS chip size2 MB
Markstested by uploader
AddedMarch 18, 2024
Updated
Original file nameDELL M5110 DQ15 AMD UMA 10246-1 2MB BIOS TESTED OK.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
DELL M5110 DQ15 AMD UMA 10246-1 2MB BIOS TESTED OK

BIOS dump for the Dell M5110 laptop, board number 10246-1, built by Wistron and supplied for a 2 MB flash chip. The uploader marked it as tested, though the facts do not say what was tested or on which hardware. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision on your board match the file, and save the original chip contents as a backup first. The archive is a RAR file of about 2.9 MB.

For board 10246-1 the catalog also has 2 schematics, 1 boardview file, and 1 BIOS dump.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Dell M5110 10246-1. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal