Skip to content

Dell MIG41R 09152-1M BIOS

BIOS 09152-1M Added: Oct 13, 2021 ZIP · 0.7 MB

File details

TypeBIOS
BrandDell
ModelMIG41R
Board number09125-1M, 09152-1M
Board maker (ODM)Wistron
DeviceLaptop
FormatZIP
Size0.7 MB
BIOS chip size1 MB
AddedOctober 13, 2021
Updated
Original file nameDELL_MIG41R_MB_09152_1M_09125_1M_48_3BI01_01M_JL1117_REV_A01_.zip

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
DELL MIG41R MB 09152-1M 09125-1M 48.3BI01.01M JL1117 REV A01

BIOS dump for the Dell MIG41R laptop, covering board numbers 09125-1M and 09152-1M, with Wistron listed as the ODM. The file is sized for a 1 MB flash chip and is supplied as a ZIP archive, with revision A01 noted in the original name. A BIOS dump like this is used to reprogram the SPI flash chip with a programmer after BIOS corruption or a failed update. Before flashing, confirm that the board number and revision on your motherboard match the file, and back up the original chip contents so you can restore them if needed.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Dell MIG41R 09152-1M. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal