Skip to content

Dell OptiPlex 7070 17509-3 BIOS (32 MB)

BIOS 17509-3 Added: Nov 8, 2025 RAR · 8.4 MB

File details

TypeBIOS
BrandDell
ModelOptiPlex 7070
Board number17509-3
Board maker (ODM)Wistron
DeviceLaptop
FormatRAR
Size8.4 MB
BIOS chip size32 MB
Markstested by uploader
AddedNovember 8, 2025
Updated
Original file nameDELL optiplex 7070 17509-3 32MB BIOS TESTED OK.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
DELL Optiplex 7070 17509-3 32MB BIOS TESTED OK

BIOS dump for the Dell OptiPlex 7070, board number 17509-3, with a 32 MB flash chip size. The uploader marked the file as tested, but the catalog has not verified that claim, so treat it as the uploader's note. A dump like this is used to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before writing anything, confirm that the board number and revision on your board match the file, and save a backup of the original chip contents. The archive is a RAR file of about 8.4 MB.

For board 17509-3 the catalog also has 1 BIOS dump.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Dell OptiPlex 7070 17509-3. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal