Skip to content

Dell OptiPlex 7440 BIOS (clean ME)

BIOS Added: Apr 8, 2024 RAR · 15 MB

File details

TypeBIOS
BrandDell
ModelOptiPlex 7440
DeviceAll-in-one PC
FormatRAR
Size15 MB
Marksclean ME, fast boot
AddedApril 8, 2024
Updated
Original file nameDELL OptiPlex 7440 AIO IPPSL-BF CLEAN ME OKOK.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
DELL OptiPlex 7440 AIO IPPSL-BF CLEAN ME

BIOS dump for the Dell OptiPlex 7440 all-in-one PC, shared as a RAR archive of about 14.6 MB with a cleaned Intel ME region and fast boot noted in the file details. Technicians use a dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. No board number or revision is given in the facts, so check the board marking on your unit against the original file name before flashing. Save the original chip contents first so you can restore them if the new image does not work.

The catalog also lists 1 BIOS dump for the Dell OptiPlex 7440.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Dell OptiPlex 7440. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal