dsl-2600u HW verz2 Fw ver1.08 BIOS
File details
| Type | BIOS |
|---|---|
| Revision | Z2 |
| Format | RAR |
| Size | 1.2 MB |
| Marks | tested by uploader |
| Added | July 18, 2021 |
| Updated | |
| Original file name | dsl-2600u HW verz2 Fw ver1.08 TESTED OK.rar |
Where to get the file
Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.
Alternative links
No other copies are known yet.
Description
This BIOS dump is marked as tested by the uploader and is labeled revision Z2, with firmware version 1.08 in the original file name, which reads dsl-2600u HW verz2 Fw ver1.08 TESTED OK. The archive is a RAR file of about 1.2 MB. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before writing anything, confirm that the board number and revision match your board, and save a full read of the original chip contents as a backup.
Description generated from the catalog data. ·
Questions about this file
How do I flash this BIOS dump?
Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.
Will this BIOS work on my board?
Only if the board number and revision match: dsl-2600u HW verz2 Fw ver1.08. Dumps from a different board or revision can leave the board dead.
What does “clean ME” mean?
The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.