Skip to content

eMachines E732 DA0ZRCMB6C0 BIOS

BIOS DA0ZRCMB6C0 Added: Jun 12, 2021 RAR · 1.8 MB

File details

TypeBIOS
BrandeMachines
ModelE732
Board numberDA0ZRCMB6C0
Board maker (ODM)Quanta
RevisionC
DeviceLaptop
FormatRAR
Size1.8 MB
Marksincludes EC firmware
AddedJune 12, 2021
Updated
Original file nameE-MACHINES E732 SERIES DA0ZRCMB6C0 REV C BIOS & EC.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the eMachines E732 laptop, board number DA0ZRCMB6C0, revision C, from Quanta. The archive also includes EC/KBC firmware, so both the BIOS and embedded controller images are covered. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before writing anything, confirm that the board number and revision on your motherboard match, and back up the original chip contents so you can recover if the flash does not go as planned.

For board DA0ZRCMB6C0 the catalog also has 1 schematic and 2 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: eMachines E732 DA0ZRCMB6C0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal