Skip to content

EX280 NM-B521 BIOS (REV 2.0, clean ME)

BIOS NM-B521 Added: May 13, 2024 RAR · 6.2 MB

File details

TypeBIOS
Board numberNM-B521
PlatformEX280
Board maker (ODM)Compal
Revision2.0
DeviceLaptop
FormatRAR
Size6.2 MB
Marksclean ME, fast boot
AddedMay 13, 2024
Updated
Original file nameBIOS EX280 NM-B521 REV 2.0 2018-03-29 CLEAN ME OKOK.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
BIOS EX280 NM-B521 REV 2.0 2018-03-29 CLEAN ME

BIOS dump for the Compal NM-B521 laptop board, revision 2.0, platform EX280. The archive is a RAR file of about 6.2 MB with a cleaned Intel ME region and a fast boot flag. A dump like this is used to reprogram the SPI flash chip with a programmer after BIOS corruption or a failed update. Confirm that the board number NM-B521 and revision 2.0 match your motherboard before flashing, and save the original chip contents first so you can restore them if needed.

For board NM-B521 the catalog also has 1 schematic, 1 boardview file, and 6 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: EX280 NM-B521. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal