Skip to content

FLAE1 LA-J781P BIOS

BIOS LA-J781P Added: Jul 27, 2024 RAR · 6.4 MB

File details

TypeBIOS
Board numberLA-J781P
PlatformFLAE1
Board maker (ODM)Compal
Revision1.0
DeviceLaptop
FormatRAR
Size6.4 MB
BIOS chip size8 MB
AddedJuly 27, 2024
Updated
Original file nameFLAE1 LA-J781P REV 1.0 2019-11-22 8MB WORKIGN BIOS 100%.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
FLAE1 LA-J781P REV 1.0 2019-11-22 8MB WORKIGN BIOS 100%

BIOS dump for a Compal laptop board LA-J781P, revision 1.0, platform FLAE1, supplied for an 8 MB SPI flash chip in a RAR archive of about 6.4 MB. The original file name marks it as a working BIOS dated 2019-11-22. Technicians use a dump like this to reprogram the flash chip with a programmer after a corrupted BIOS or a failed update. Check that the board number LA-J781P and revision 1.0 match your motherboard before flashing, and save the original chip contents first so you can restore them if needed.

For board LA-J781P the catalog also has 1 BIOS dump.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: FLAE1 LA-J781P. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal