Skip to content

Gigabyte H410M BIOS (REV 1.0)

BIOS Added: Aug 28, 2023 ZIP · 9.4 MB

File details

TypeBIOS
BrandGigabyte
ModelH410M
Revision1.0
DeviceDesktop motherboard
FormatZIP
Size9.4 MB
Markstested by uploader
AddedAugust 28, 2023
Updated
Original file nameGIGABYTE H410M PRO-VH REV 1.0 TESTED OK.zip

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
GIGABYTE H410M PRO-VH REV 1.0 TESTED OK

BIOS dump for the Gigabyte H410M desktop motherboard, revision 1.0, supplied as a ZIP archive of about 9.4 MB. The uploader marked it as tested, though that label comes from the poster and has not been independently checked. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision printed on your board match the file, and save the original chip contents as a backup.

For the Gigabyte H410M the catalog also has 1 schematic, 2 boardview files, and 3 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Gigabyte H410M. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal